All posts by : admin

How to read an oil pressure gauge needle Two
15 Jul
8:37

How to read an oil pressure gauge needle Two

1    Blog  admin

The oil pressure is an important indicator for tanks and commercial vehicles and oil consumption. Mechanical gauges tubes working oil pressure sensitive Bourdon connected to each pressure line. An oil pressure gauge has two needles two systems separate Bourdon tube and needles in the lateral aspect connected to two separate…

How to put the spark plug wires in the correct order on
07 Jul
8:36

How to put the spark plug wires in the correct order on

1    Blog  admin

Replace spark plugs requires more than the ability to pull each one out and put a new one in the empty space. It is essential to connect properly before starting the engine. The three critical components to ensure that the plugs are properly connected is the firing order, the numbering…

How to know if an alternator is failing?
02 Jul
8:32

How to know if an alternator is failing?

0    Blog  admin

An alternator on a car engine is essentially the generator. The purpose of the alternator is to convert gasoline into energy that can power the electrical components of your vehicle, including replacement of the battery power. The alternator is essential to keep the car running for a long time ….

How to perform a service to an automatic transmission
24 Jun
8:33

How to perform a service to an automatic transmission

0    Blog  admin

An automatic transmission transfers power from the engine to the rear wheels. It does so by mechanical, hydraulic and mechanical systems of the vehicle. The automatic transmission has hydraulic fluid to lubricate gears and other mechanical components, so as to ensure smooth shift. However, automatic transmissions are not maintenance-free service…

How to polish a combustion chamber
18 Jun
8:34

How to polish a combustion chamber

0    Blog  admin

The invention of hemispherical heads in 1901 marked the beginning of understanding the fluid dynamics of an explosion of gasoline in a combustion chamber. A golden age of racing cars the 1950s, it was standard practice for do-it-yourself car and motorcycle manufacturers, at least polished heads cast iron sand are,…

How to change the distributor cap and rotor
09 Jun
8:20

How to change the distributor cap and rotor

0    Blog  admin

The distributor cap and rotor under the cap are very important aspects of the ignition system of your car. The spark plug wires are connected to the distributor cap and rotor rotates as the engine speed, a signal is sent to each spark plug wire passing through, sending spark to…

How to Change the Radiator Fan
03 Jun
8:21

How to Change the Radiator Fan

0    Blog  admin

The cooling fan is a very important element in the engine cooling system of the vehicle. The combustion occurring within the propeller generates large amounts of heat, which effectively eliminates the radiator when the vehicle is in motion, since the cool ambient air achieved naturally pass through. When we stopped…

How to Change the Starter Motor
28 May
8:23

How to Change the Starter Motor

0    Blog  admin

The starter is a very important element in our vehicles, allowing us to restart the engine running once it has been turned off. Due to wear and frequent use, the starter motor can get damaged, so we must change or repair. This article will explain how to change the starter…

How to change the timing belt on a Honda Civic
19 May
8:25

How to change the timing belt on a Honda Civic

0    Blog  admin

Change timing belt on a Honda Civic before they ruin is essential. The damage can occur if the belt is worn enough while the car is moving. The Honda Civic requires the timing belt to be changed every 105,000 miles. It is a good idea to change it before the…

How to clean the water passages in the engine block
15 May
8:26

How to clean the water passages in the engine block

0    Blog  admin

The engine block is the heart of the car. It’s where the pistons generate energy to propel the car forward. However, the car will not run smoothly if the engine block is dirty or dirty. The engine block is full of water passages, which can be easily cleaned with nylon…